Hand Drill
-
Patented Hand Type Core Drilling Systems Only at Inka.
-
Original El Coring Systems are only available in Inka.
-
Robust Hand Drilling systems are only available in Inka.
-
In order not to be a victim of Madden-Manen, beware of our imitations.
Our company İnka Yapı Taahhüt was established in 2002 in Ankara.
Since the day we were founded, we have designed the İNKA & STAHLMANN Hand Held Gasoline Core Drilling Machine and systems in order to contribute to our country's economy by developing our company by following the innovations in the construction, infrastructure, energy, mining and marble sectors.
As our company, to contribute to our country's economy and to provide mining, marble, infrastructure and so on. in order to minimize the investment, operation and cost risks of the investing institutions and to determine whether the investment is correct; We are happy to have made the pre-detection and detection applications easy-fast and economical, which should be done in all the mines and marble quarries to be invested with Inka & Stahlmann Hand Type Core Systems, which we have designed and whose patent belongs to our company.
As our company, we also provide rental and sales services of heavy construction machinery (dozer-grader-cylinder-excavator), as well as consultancy services on all legal, technical and application issues related to mining.
Our products
General Power
Honda
Kawasaki Th 48
Kawasaki Tj 53
Chinese goods
2 stroke 2 HP
Chinese goods
4 stroke 2.5 HP
İNKA & Stahlmann HAND TYPE CORE SYSTEMS
-With Inka Hand Type Core Coring Systems, Hand Type Core Core applications are easy, fast and economical on all kinds of hard and soft soils, with a diameter of 42 mm, at depths of 5 meters - 10 meters - 15 meters and 20 meters.
- The design and patent of Hand Held Core Drilling systems belong only to our company.
-In Inka & Stahlmann hand core drilling systems, we use imported Kawasaki – Mitsubishi – Honda- General Powers – Stahlmac – Stahlmann brand gasoline hand drilling motors.
-The gasoline core drilling machines that we use in our Inca Hand Type Core systems have been categorized and separated according to their Inca hand core lengths in line with their power and characteristics.
-For example; For our 20-meter-long Inka Hand Drilling Systems, engines of a certain power are used.
-Prices of our Inca hand-held portable core drilling systems; varies according to the preferred tool length and engine brand.
-The rods we use in our Inka Portable Core systems are manufactured from special steel pipes and produced in 50 cm length, and they have a plug-in system that can be assembled and disassembled even by hand.
All sub-equipments (rods, core barrel, cutting diamonds, auger rods) of İnka & Stahlmann hand drilling systems, including gearbox, are completely manufactured by our company.
- Our company provides spare parts, supply and service for the imported engines we use in Stahlmann Gasoline Core systems.
-The stock of all equipment of Inka Hand Drilling Systems is always kept within our company.
-As our company; We provide 24/7 service to our customers with spare parts supply, supply and service support.
-We always provide our customers with accurate and real information about İnka & Stahlmann Hand Drilling Core Systems and all the different engines I use in these systems.
-As our company, we never neglect or abuse customer trust.
İNKA HAND CORE HAND DRILLING SYSTEMS USER'S MANUAL
READ INSTRUCTIONS FOR SAFE USE
MISUSE CAN CAUSE SERIOUS DAMAGES.
NEVER RUN THE MACHINE WITH OIL-FREE GASOLINE!
GASOLINE CLASS: LEAD-FREE 95 OCTANE - OIL CLASS: 2 T GASOLINE ENGINE OIL
-
A mixture will be made by adding maximum 30 ml 2-stroke engine oil (2t oil class) to one liter of gasoline. Gasoline and oil mixture should be done outside in a can. Before refueling the machine with oil, it must be rinsed outside in a can. In gasoline-oil mixture, set Use the injector (30 ml) included.
-
Push the black latch on the carburetor on the hand drill motor towards the rubber pump (symbol, open: iii) on the carburetor, then pump the rubber pump to fill the engine/carburetor with gasoline. Move the black latch to the I/I position with the symbol closed.
-
Hand drill engine: turn the button on the throttle trigger to the on (on) position, press the gas and pull the start rope until it starts, immediately after the machine starts, move the black latch on the carburetor to the symbol, open: ii position.
-
Stop button: It is the off position of the button on the throttle trigger located on the right handle.
-
Initial start-up of the gasoline core drilling machine; Perform the running-in operation by giving the gas intermittently, without putting the machine under load, until a tank of oily gasoline runs out.
-
Never operate the hand drilling machine with oil-free gasoline.
-
Shell 95 octane unleaded gasoline is recommended for the hand core engine.
-
2-stroke gasoline engine oil class: 2t.
-
Let the hand drill core rig rest for 10 minutes after every hour of operation.
-
During the hand-held drilling core application, excessive pressure should not be exerted on the machine. In case of hand drilling – excessive pressure in hand core application, machine linings and transmission may be damaged.
-
Use the gas trigger to increase/decrease/adjust/balance the cutting/drilling speed at the time of application with a gasoline hand core drill.
-
Keep away from fire, sparking materials, lit cigarettes and similar substances when using and refueling the hand core drill. Do not start/stop the machine while refueling.
-
Always wear protective work clothes and equipment when using a gasoline drill and when performing hand drilling core applications. (Use safety glasses, earplugs, dust mask, gloves, hard hat and work shoes and similar equipment)
-
After you are finished with the machine, be sure to empty the oily gasoline remaining in the tank.
Inka & Stahlmann Gasoline Hand Core - Hand Held Gasoline Drilling - Hand Held Core Drilling Machines and Hand Drilling Core Drilling Equipment for hard floors application guide
The cutting diamonds are in the closed state. In order to open the cutting diamond bits (sharpening operation), attach the cutting diamond bit to the core barrel and rotate it on the concrete floor for 5 to 10 minutes while it is connected to the machine. Since there is sand in the concrete, the cutting diamond bit will become opened by friction.
The area to be drilled-cored by hand (the area where the cutting diamond will come into contact) should be disturbed with a hammer or similar tool, this will assist in the centering of the drill core machine and the drill rod (the rod with a diamond on the tip). Hand-held core drilling - core rods are 50 cm long. Manual drilling-core application is started with a 50 cm long core barrel (tij with a diamond on the tip). After reaching a depth of 50 cm, the core barrel (the rod with a diamond on the tip) is removed from the hole and separated from the machine, and the sample (core) inside is removed/emptied, (in drilling-core applications, the sample/core removal-emptying process of the core barrel is done at every 50 cm depth). An extension rod (straight pipe type rod) is attached to the machine, a core barrel rod is attached to the front of the extension rod and inserted into the drilled hole and drilling-core application is continued. After reaching a depth of 1 meter, the rods are removed from the hole, the core barrel (the rod with a diamond on the tip) and the extension rod are removed from the hole and separated from the machine, and the sample (core) inside the core barrel rod is removed/emptyed.
Use of helical auger rods; In the drill hole drilled at a depth of 1 meter, in order to continue the drilling core application with helical type auger rods, a straight pipe type extension rod is attached to the machine, a helical type auger extension rod is attached to the front of the straight pipe type extension rod thread, A core barrel rod (with a cutting diamond on the tip) is attached to the front of the spiral type auger extension rod and the drill-core rod application is continued by releasing the rods mounted to each other in the drill hole drilled at a depth of 1 meter. After descending to a depth of 1 meter 50 cm (1.5), the core barrel-helix type auger rod and core barrel in the borehole are removed from the hole and the core/sample inside the core barrel is emptied. _cc781905-5cde-3194-bb3b3b-136bad _cc781905-5cde-3194- ccde-3194cf13631365c5cf3b31994cbdc13653155cf -bb3b-136bad5cf58d_ _cc5819_f58cf31365cde-cc5819_f583353bbd_cc581994-bb335359cde-3194-bb3b-136bad5cf58d_cc-5819_f58cf313353bd_cc581934-bb3153bd -5cde-3194-bb3b-136bad5cf58d_ 136bad5cf1905cde_cc781905-5cde-3194-bb3b-136bad5cf1931305c_ bb3b-136bad5cf58d_ _cc5819_f583bd_cc781904-bb3353b_cc581905cf335359cde-3194-bb3b-136bad5cf58d_ _cc5819_f58cf313353b_cc581994-bb3353bd_cc581994-bb3353b3b3b-136bad5cf58d_ _cc781905 5cde-3194-bb3b-136bad5cf58d_ _cc781905-5cde-3194-bb3b-136bad5cf58dcf58d_bb3353b5cf781905-5cde-3194-bb3b-136dcf3b31363159c3cc781905-bb3bdcf5cf58dc359c359c4 -136bad5cf58d_ _cc781905_bb3b-136bad5cf58d_ _cc781905_bb3cf-78335bdb3b-136bad5cf58d_ _cc78359cb3bdcf1933594 -3194-bb3b-136bad5cf58d_ _cc781905-5cde-3194-bb3b-bb3b-136bad5cf58d_ _cc-cde-3194-bb3b-136bad5cf58d_ _ccde-cc-383194_ _cdeb-cc383194 136bad5cf58d_ _cc781905_bb3b-136bad5cf58d_ _cc781905_bb3cf-3135359_bb3b-136bad5cf58d_ _cc781905_bb3cf-313659 3194-bb3b-136bad5cf58d_ Advantages of Spiral Type Auger Rods: The hand-held drilling core machines in the market are used with completely flat type rods (pipe rods). With hand-held drilling core drilling machines using straight pipe type rods, drilling-core applications are made only on hard soils, as well as straight pipe type rods get stuck in the hole during application and do not give the desired efficiency, and often cannot be removed from the borehole due to jamming. persons/companies etc. it is a waste of both time and money. The design and patent of which belong to our company and are manufactured and offered for sale by our company, are compatible with the screw type/twisted rods and flat type auger rods. It also provides convenience. With single rod equipment, drilling and sampling (core) applications can be made on hard and soft soils.
Rod extensions after a depth of 1 meter 50 cm (1.5m): To continue the drill-core application (rod extensions) at a depth of 1.5 meters, between the straight pipe type extension rod attached to the machine and the core barrel rod (rod with a cutting diamond on the end) A helix type auger extension rod is added and the necessary rod lengthening is performed, and drilling-core application is continued.
While drilling and core drilling with a hand drilling machine, excessive pressure should not be applied to the machine. The machine will do the drilling process by cutting the hard ground under its own weight. In case of excessive pressure on the machine during the drilling application, the machine linings will be damaged. A light pressure should be applied to the machine by hand during core drilling.
Drilling with hand-held core drilling machine and equipment should be done at an angle of 90 degrees and this angle should not be lost. Work without straining (proving) the machine. Work carefully to avoid damage to your arms in case of drill/rod jamming during manual drilling core drilling. Example: In case of compressions that may occur during operation, by separating the machine from the end, the stuck end is always in the right direction with the rod rescue arm designed in a t shape. Remove the stuck rods by turning them correctly.
Apply grease to the caps of all rods (the places where the rods are connected to each other), part of the hand-held core drilling equipment.
In the practice of hand drilling, the use of water is very important. The water will not only cool the rods that are heated by friction, but also provide great benefits in the cutting process. At least 15 liters of water will be drained for 2-3 meters depth. Manual drilling In the case of little or no water in core drilling, the rods and cutting diamonds are damaged and jammed in the hole, damaging the machine and hand-held core drilling becomes impossible. Be careful and cautious so that your arms are not damaged in a jam that may occur during drilling.
While performing core drilling with a hand drilling core drilling machine, raising and lowering the hand drill core machine 10-15 cm will be beneficial in removing the muddy water in the hole and the rod and will facilitate the application of card drilling.
During the application with a core drilling machine, put liquid soap into the water pumps, the soap facilitates the cutting process.
With hand-held drilling core machines and equipment, you can perform drilling core application vertically and horizontally.
When the core drilling process you have performed with the hand drill-core machine is finished, clean and dry your rods and core barrels and lubricate the joints of the rods with grease.
READ INSTRUCTIONS FOR SAFE USE
MISUSE CAN CAUSE SERIOUS DAMAGES.
USING AUGER TOOLS FOR DRILLING (DRILLING) IN SOFT SOILS
Rods designed for drilling (drilling) applications in soft soils with a hand drilling machine are in the form of auger-helix. Drilling (drilling) in soft ground; The machine is started with the lead auger with a drill at the end and after descending to a depth of 50, 55 cm, the drilling process is continued by adding back/extension augers to the back of the leading auger.
Drilling with the machine should be done at an angle of 90 degrees and this angle should not be lost. Work without straining the machine. If you twist/drag the machine, the gears in the gearbox may be damaged. In case of possible compressions during operation, separate the machine from the end and use the rod rescue arm, the stuck end of which is designed in a tee shape. You should always move to the right with the rod rescue lever.
While drilling (drilling holes) on soft soils, excessive pressure should not be applied to the machine. The machine and the auger apparatus will make holes in their own weight. In case of excessive pressure on the machine during the drilling application, the machine linings will run out early. Light pressure should be applied during application.
While drilling on soft ground with the machine, raising-lowering the machine 15cm-20 cm up-down will be beneficial in removing the mud collected in the hole and around the augers and will facilitate the drilling application as well as prevent auger jams that may occur.
Water use is very important in drilling practice. Water will not only cool the augers that are heated by friction, but also provide great benefits in drilling. for 2-3 meters depth at least 15 liters of water will be drained. In case of giving little or no water in the drilling application, the augers are damaged and they become jammed in the hole, making the drilling application impossible.
Apply grease to the rear parts of all rods (where the rods cross each other),
During drilling, put liquid soap into the water pumps, it makes the soap cutting process easier.
You can do drilling (hole drilling) vertically and horizontally.
When drilling is complete, clean your augers, dry them and lubricate their joints with grease.